This is one of the more popular models of three-way reclining lift chairs that offers style and quality at an exceptional price. Its maximum depth when in the fully reclined position is 68" instead of 60". It comes standard with a low volt motor and battery back-up and features a two-way recline. Weight capacity is 325 lbs. This chair features a two-year warranty on all components. Battery back-up System is standard on this chair, however the battery back-up is not available with 2 or 4 Vib/Heat at this time. Usually ships in 7 to 10 days.
Regular Shipping is FREE! (for orders above $50) within continental USA.
FEATURES for Three-Way Reclining Lift Chair - Dawson
Most conventional foam will shrink 10 - 15% in size over the first couple of years.
This chair uses a special break-in process before the foam is ever cut to make the foam feel good from its first use. Additionally,
it glues a layer of super soft on top of the Acella-Flex, giving a very nice feel to the seat; but you still have the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure reducing. At this time, no other life chair manufacturer uses this seating configuration or benefit.
Seat Springs are 9 gauge Morley system, no sag springs. The springs are tied together with tie wire to make every spring work together as a seat unit. Five seat springs are in this chair, and they are correctly spaced on the spring rails by a special clip rail achine. The front seat rail on the frame is larger and thicker than the competitors' products, which makes the seat much stronger and durable.
There is a retainer rail secured by steel brads on top of the seat springs to ensure they do not come loose. The back springs used are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used.
Acella-Flex foam is used for padding, as it is the closest to a perfect seating configuration in the industry. It basically pushes back 1 lb. For every pound of weight exerted, making the chair sit
the same for a person of 90 lbs. or a person of over 300 lbs. It retains
99.9% of its original shape and size.
Magazine pouch on lower outside of recliner for added storage.
The frame of the chair is all kiln dried hardwood.
All stress points are kiln dried oak.
All joints are glued and connected with steel fasteners.
Uni-construction of seat-back assembly independent lab tested for strength and durability.
Gang nails are used at all other critical joints or stress points.
All bolts used are grade 5 (and we are the only lift chair company that uses grade 5 bolts).
Bolts go entirely through the wood.
No lag screws are used to secure the mechanism.
Each mechanism is secured by special locking T-nuts to insure that the mechanism stays tight throughout the lifetime of the chair.
All critical connection points for reclining hardware, etc., have a double locking nut, nylon aircraft grade locking nut.
All wood screws that are used are the best and strongest available.
Corner blocks are used throughout the chair at all critical points for added strength.
An extra rail is used across the top of the seat back to help keep the back straight and square.
The fiber used in the back is a dustless, odorless, non-allergenic, conjugated fiber, which is the best in the industry.
This feature makes the back retain their original shape and gives greater comfort when seated.
All fabric used on the Med-Lift chairs meets both Cal 117 and UFAC requirements of flammability, and they are tested yearly.
Also, we make sure that before the upholstery is placed on the frame, that no fabric comes in direct contact with wood.
The wood frame is surrounded by an extra layer of foam or micro foam to ensure long fabric life.
This extra padding makes the arms, backs, front arm, etc. feel softer and more plush. The foundation of the lift chair is the base.
We use the Super Sagless lift base (which is made in the USA), and is the best available.
The Super Sagless base we use is the most stable base in the upright lifted position on the market today.
This chair contains a Low Volt Quiet Motor.
Foam - 10%;
Fabric - 10%;
Steel - 30%;
Fasteners and miscellaneous - 5%
It comes standard with a low volt motor and battery back-up.
This chair features a two-year warranty on all components.
Battery back-up System is standard on this chair.
Options available at an additional charge on this chair are:
Armrest headrest covers; snap-on head pillow;
Moveable infrared heat; extra magazine pocket.
The Dawson fabric is "married" to the #1100 Series chairs, however,
you may upgrade to Level 5 and 6 at an additional charge (Bella Crypton,
Bella Suede and Ultra)
SPECIFICATIONS for Three-Way Reclining Lift Chair - Dawson
41" - 68"
Reclined length from back of seat to end
Thank you for visiting uCanHealth.com. We appreciate very much the chance to serve you and meet your home healthcare needs. If you do not like what you see or could not find what you want here, please feel free to contact us. Your complete satisfaction is our commitment and your feedback will help us better serve you and many others.
If you would like to order 5 or more of this product. Please
ask us for volume discount.
We accept: Visa, Mastercard, Discover, American Express, Personal Check, Money Order and Cashier Check. If you are purchasing for an institution (school, hospital, government...), we also accept PO. Please contact us for the details of the process.